LET’S BUILD TOGETHER

Curl-tailed chameleon

35 pieces 14 steps · Print instructions

A little before you begin

The tail, legs and head stay fixed. The two back sections lift off and exchange places.

Both coloured sections are included; no extra bricks are needed for the swap.

Move the chameleon by its broad base, keeping the tail clear.

See all the pieces

A LITTLE PREPARATION

Gather your pieces

Match the shapes and quantities. The pictures show our colours. Colour names in the steps refer to the pictures; keep useful contrasts, such as a light belly against a dark body.

35pieces in total

See the original colours

Your checklist stays on this device when browser storage is available.

01

STEP 1 OF 14

Lay two green 4 × 8 plates end to end, making a long narrow floor.

Lay two green 4 × 8 plates end to end, making a long narrow floor. New additions are shown in their original colours; earlier pieces are lighter.
02

STEP 2 OF 14

Put four brown 2 × 4 bricks end to end down the middle. Their edges line up with both ends of the green floor.

Put four brown 2 × 4 bricks end to end down the middle. Their edges line up with both ends of the green floor. New additions are shown in their original colours; earlier pieces are lighter.
03

STEP 3 OF 14

Add four green curved feet to the branch, two on each side. Their rounded ends point outwards. Put the back pair one row in from the back of the front green floor plate. Leave two clear rows before the front pair.

Add four green curved feet to the branch, two on each side. Their rounded ends point outwards. Put the back pair one row in from the back of the front green floor plate. Leave two clear rows before the front pair. New additions are shown in their original colours; earlier pieces are lighter.
04

STEP 4 OF 14

Lay a white 4 × 6 plate across the feet, running from back to front. Its back edge is two rows from the back of the front green floor plate.

Lay a white 4 × 6 plate across the feet, running from back to front. Its back edge is two rows from the back of the front green floor plate. New additions are shown in their original colours; earlier pieces are lighter.
05

STEP 5 OF 14

Put a brown 2 × 8 plate along the back half of the branch, one row in from its back end. This crosses the join between the green floor plates.

Put a brown 2 × 8 plate along the back half of the branch, one row in from its back end. This crosses the join between the green floor plates. New additions are shown in their original colours; earlier pieces are lighter.
06

STEP 6 OF 14

Put a green double-height square at the back end of the brown tail plate and add a green square on top. Put a green square at the front end, leaving four clear rows between the uprights.

Put a green double-height square at the back end of the brown tail plate and add a green square on top. Put a green square at the front end, leaving four clear rows between the uprights. New additions are shown in their original colours; earlier pieces are lighter.
07

STEP 7 OF 14

Join the front tail square to the body floor with a green 2 × 4 plate running forwards. Its front row sits on the back row of the white body floor. Add a green square over the back half of this plate.

Join the front tail square to the body floor with a green 2 × 4 plate running forwards. Its front row sits on the back row of the white body floor. Add a green square over the back half of this plate. New additions are shown in their original colours; earlier pieces are lighter.
08

STEP 8 OF 14

Put a green curved brick over the front upright, projecting one row backwards with its rounded end forwards. Add a green 2 × 4 plate over the back upright, projecting two rows towards the body. Bridge above the opening with a green 2 × 6 brick, lined up at the back. Finish its back end with a green curved brick, rounded end backwards.

Put a green curved brick over the front upright, projecting one row backwards with its rounded end forwards. Add a green 2 × 4 plate over the back upright, projecting two rows towards the body. Bridge above the opening with a green 2 × 6 brick, lined up at the back. Finish its back end with a green curved brick, rounded end backwards. New additions are shown in their original colours; earlier pieces are lighter.
09

STEP 9 OF 14

Put two yellow 2 × 3 bricks side by side on the body floor, starting one row in from its back edge. They fit just in front of the tail connection.

Put two yellow 2 × 3 bricks side by side on the body floor, starting one row in from its back edge. They fit just in front of the tail connection. New additions are shown in their original colours; earlier pieces are lighter.
10

STEP 10 OF 14

Put a green 2 × 4 brick across the front two rows of the body plate.

Put a green 2 × 4 brick across the front two rows of the body plate. New additions are shown in their original colours; earlier pieces are lighter.
11

STEP 11 OF 14

Put a black square at each end of the head, each projecting one column outwards. Fit a green 2 × 4 brick between them, running forwards and projecting two rows beyond the head.

Put a black square at each end of the head, each projecting one column outwards. Fit a green 2 × 4 brick between them, running forwards and projecting two rows beyond the head. New additions are shown in their original colours; earlier pieces are lighter.
12

STEP 12 OF 14

Cover the eyes with a green 2 × 6 brick across the head. Put a green curved brick on the front of the jaw, rounded end forwards.

Cover the eyes with a green 2 × 6 brick across the head. Put a green curved brick on the front of the jaw, rounded end forwards. New additions are shown in their original colours; earlier pieces are lighter.
13

STEP 13 OF 14

Put a blue 2 × 4 plate across the back half of the body. Add a yellow square on its left half and a red square on its right.

Put a blue 2 × 4 plate across the back half of the body. Add a yellow square on its left half and a red square on its right. New additions are shown in their original colours; earlier pieces are lighter.
14

STEP 14 OF 14

Put a yellow 2 × 4 plate across the front half of the body, directly behind the head. Add a red square on its left half and a blue square on its right.

Put a yellow 2 × 4 plate across the front half of the body, directly behind the head. Add a red square on its left half and a blue square on its right. New additions are shown in their original colours; earlier pieces are lighter.

Part and software credits.