LET’S BUILD TOGETHER

Moon sample station

13 pieces 7 steps · Print instructions

A little before you begin

The three sample boxes lift off as connected pairs of bricks. They do not open.

All three boxes are included in this guide and inventory.

See all the pieces

A LITTLE PREPARATION

Gather your pieces

Match the shapes and quantities. The pictures show our colours. Colour names in the steps refer to the pictures; keep useful contrasts, such as a light belly against a dark body.

13pieces in total

See the original colours

Your checklist stays on this device when browser storage is available.

01

STEP 1 OF 7

Lay a white 4 × 8 plate across the table, with its long edge nearest you.

Lay a white 4 × 8 plate across the table, with its long edge nearest you. New additions are shown in their original colours; earlier pieces are lighter.
02

STEP 2 OF 7

Build a blue back wall with two 2 × 4 bricks, end to end along the far two rows.

Build a blue back wall with two 2 × 4 bricks, end to end along the far two rows. New additions are shown in their original colours; earlier pieces are lighter.
03

STEP 3 OF 7

Join the back wall with a white 2 × 8 plate, its edges lined up with the blue bricks.

Join the back wall with a white 2 × 8 plate, its edges lined up with the blue bricks. New additions are shown in their original colours; earlier pieces are lighter.
04

STEP 4 OF 7

Put a red square on the front two rows, at the left edge. Add a white square directly on top.

Put a red square on the front two rows, at the left edge. Add a white square directly on top. New additions are shown in their original colours; earlier pieces are lighter.
05

STEP 5 OF 7

Put a yellow square on the front two rows, with one clear column between it and the red box. Add a white square directly on top.

Put a yellow square on the front two rows, with one clear column between it and the red box. Add a white square directly on top. New additions are shown in their original colours; earlier pieces are lighter.
06

STEP 6 OF 7

Put a blue square on the front two rows, at the right edge, leaving one column after the yellow box. Add a white square directly on top.

Put a blue square on the front two rows, at the right edge, leaving one column after the yellow box. Add a white square directly on top. New additions are shown in their original colours; earlier pieces are lighter.
07

STEP 7 OF 7

Put red, yellow and blue square bricks along the worktop, directly behind their matching boxes.

Put red, yellow and blue square bricks along the worktop, directly behind their matching boxes. New additions are shown in their original colours; earlier pieces are lighter.

Part and software credits.