LET’S BUILD TOGETHER

Palm island

8 pieces 5 steps · Print instructions

See all the pieces

A LITTLE PREPARATION

Gather your pieces

Use whichever colours you have. Check the shapes before you start.

8pieces in total

See the original colours

Your checklist stays on this device when browser storage is available.

01

STEP 1 OF 5

Place the yellow semicircular plate with its straight edge at the back and its rounded edge toward you.

Place the yellow semicircular plate with its straight edge at the back and its rounded edge toward you. New additions are shown in their original colours; earlier pieces are lighter.
02

STEP 2 OF 5

Build a palm trunk on the left with two brown round tower bricks, one above the other.

Build a palm trunk on the left with two brown round tower bricks, one above the other. New additions are shown in their original colours; earlier pieces are lighter.
03

STEP 3 OF 5

Put a brown square to the right of the trunk for the seat support. Add a cream small plate across it, with one stud column overhanging each side.

Put a brown square to the right of the trunk for the seat support. Add a cream small plate across it, with one stud column overhanging each side. New additions are shown in their original colours; earlier pieces are lighter.
04

STEP 4 OF 5

Add two brown log bricks along the back row of the seat for the backrest. The front row stays clear.

Add two brown log bricks along the back row of the seat for the backrest. The front row stays clear. New additions are shown in their original colours; earlier pieces are lighter.
05

STEP 5 OF 5

Finish the palm with the green leaves. Keep the wide canopy above the seat as you lower it onto the trunk.

Finish the palm with the green leaves. Keep the wide canopy above the seat as you lower it onto the trunk. New additions are shown in their original colours; earlier pieces are lighter.

Part and software credits.