LET’S BUILD TOGETHER

Pickup truck

12 pieces 6 steps · Print instructions

See all the pieces

A LITTLE PREPARATION

Gather your pieces

Use whichever colours you have. Check the shapes before you start.

12pieces in total

See the original colours

Your checklist stays on this device when browser storage is available.

01

STEP 1 OF 6

Set the blue wheeled base on the table. Its four black wheels are already attached.

Set the blue wheeled base on the table. Its four black wheels are already attached. New additions are shown in their original colours; earlier pieces are lighter.
02

STEP 2 OF 6

Put the blue small plate on the chassis studs, then centre the blue base plate over it. The wide floor overhangs by two rows at both ends.

Put the blue small plate on the chassis studs, then centre the blue base plate over it. The wide floor overhangs by two rows at both ends. New additions are shown in their original colours; earlier pieces are lighter.
03

STEP 3 OF 6

Build the open loading bed at the rear. Add two blue wall bricks along each side, then turn one blue wall brick across the middle of the back edge for the tailgate.

Build the open loading bed at the rear. Add two blue wall bricks along each side, then turn one blue wall brick across the middle of the back edge for the tailgate. New additions are shown in their original colours; earlier pieces are lighter.
04

STEP 4 OF 6

Make the cab at the front with a white long brick across the floor, then a blue long brick directly above it for the windscreen.

Make the cab at the front with a white long brick across the floor, then a blue long brick directly above it for the windscreen. New additions are shown in their original colours; earlier pieces are lighter.
05

STEP 5 OF 6

Put the white square plate above the cab. Its front edge lines up with the front of the truck and its back half projects toward the loading bed.

Put the white square plate above the cab. Its front edge lines up with the front of the truck and its back half projects toward the loading bed. New additions are shown in their original colours; earlier pieces are lighter.
06

STEP 6 OF 6

Place the brown square in the open loading bed as a parcel. Put it just in front of the tailgate, centred between the side walls.

Place the brown square in the open loading bed as a parcel. Put it just in front of the tailgate, centred between the side walls. New additions are shown in their original colours; earlier pieces are lighter.

Part and software credits.