YOUR OFFLINE GUIDE
Park entrance
16 pieces · 8 steps
Bright pillars and low green walls frame a small park entrance. Add the colourful top row, then imagine the paths and places beyond it.
Before you build
Match the shapes
Compare each part with its picture and count its rows of studs. A square brick has two rows of two studs; a long brick has two rows of four. Use the full parts list for the exact shapes and quantities.
Follow the colours
Match the shapes and quantities. The pictures show our colours. Colour names in the steps refer to the pictures. Keep contrasting colours where they help you recognise the model.
Count the studs
The bumps on top are called studs. Count them when a step asks for a gap or an overhang. Put the build on a flat surface and keep its front facing the same way as in the pictures.
Add a little at a time
New pieces keep their colour in each step. Earlier pieces look lighter so you can see what has changed. Each list tells you exactly what to add.
Build together
An adult can read the steps while a child finds the pieces. The counts are for this one model. For two models to stay built, add their parts lists together.
Check a toy’s size before planning a route through the opening.
Gather pieces
Match the shapes and quantities. The pictures show our colours. Choose your own colours for the same parts; changing a part’s shape is a different substitution.
A wheeled base counts as one complete part, including its attached wheels.
1 × Base plate (4 × 8 studs)
Green
Part 4672a
1 × Long plate (2 × 8 studs)
Red
Part 44524
1 × Small plate (2 × 4 studs)
Cream
Part 40666
1 × Square brick (2 × 2 studs)
Blue
Part 3437
2 × Square brick (2 × 2 studs)
Orange
Part 3437
6 × Square brick (2 × 2 studs)
Yellow
Part 3437
4 × Wall brick (1 × 2 studs, double height)
Green
Part 4066b
Shape-only checklist
- 1 × Base plate (4 × 8 studs)
- 1 × Long plate (2 × 8 studs)
- 1 × Small plate (2 × 4 studs)
- 9 × Square brick (2 × 2 studs)
- 4 × Wall brick (1 × 2 studs, double height)
Total: 16 pieces
Build
STEP 1 OF 8
Put the green four-by-eight base plate on the table, with its long edge running left to right.
Add these pieces
- 1 × Base plate (4 × 8 studs) (Green)
Earlier pieces are lighter in the picture.
STEP 2 OF 8
Start a yellow square pillar at each end of the base. Centre them across its four-stud width.
Add these pieces
- 2 × Square brick (2 × 2 studs) (Yellow)
Earlier pieces are lighter in the picture.
STEP 3 OF 8
Add a yellow square brick to each pillar.
Add these pieces
- 2 × Square brick (2 × 2 studs) (Yellow)
Earlier pieces are lighter in the picture.
STEP 4 OF 8
Add one more yellow square brick to each pillar. Both pillars should now be three bricks high.
Add these pieces
- 2 × Square brick (2 × 2 studs) (Yellow)
Earlier pieces are lighter in the picture.
STEP 5 OF 8
Add green wall bricks beside the bottom of each pillar, one on each side.
Add these pieces
- 4 × Wall brick (1 × 2 studs, double height) (Green)
Earlier pieces are lighter in the picture.
STEP 6 OF 8
Bridge the pillars with a red long plate. Line up both ends with the pillars.
Add these pieces
- 1 × Long plate (2 × 8 studs) (Red)
Earlier pieces are lighter in the picture.
STEP 7 OF 8
Add orange square bricks above both pillars and a blue square in the middle, leaving one row clear either side of the blue brick.
Add these pieces
- 1 × Square brick (2 × 2 studs) (Blue)
- 2 × Square brick (2 × 2 studs) (Orange)
Earlier pieces are lighter in the picture.
STEP 8 OF 8
Centre the cream small plate on the blue square, with one row overhanging at either end. Press the top plate and red bridge into place.
Add these pieces
- 1 × Small plate (2 × 4 studs) (Cream)
Earlier pieces are lighter in the picture.
READY TO PLAY
Your little story
Give the park a name.
Describe three things inside it.
Welcome a pretend visitor through the entrance.
Sources and credits
Original assembly. Part geometry adapted from the LDraw Parts Library; attribution and source notices retained. Colours are illustrative.
Revision: 1e791558b14e5808f60ac9a84a26ef05fc057bf49afefb6d13a4ed85845c56a3
Source notices and software licences · Model and inventory record · Render record