YOUR OFFLINE GUIDE
Village market stall
14 pieces · 6 steps
A red-and-white canopy shades a small village counter. Open frames and two bright display blocks make a welcoming spot for pretend shopping.
Before you build
Match the shapes
Compare each part with its picture and count its rows of studs. A square brick has two rows of two studs; a long brick has two rows of four. Use the full parts list for the exact shapes and quantities.
Follow the colours
Match the shapes and quantities. The pictures show our colours. Colour names in the steps refer to the pictures. Keep contrasting colours where they help you recognise the model.
Count the studs
The bumps on top are called studs. Count them when a step asks for a gap or an overhang. Put the build on a flat surface and keep its front facing the same way as in the pictures.
Add a little at a time
New pieces keep their colour in each step. Earlier pieces look lighter so you can see what has changed. Each list tells you exactly what to add.
Build together
An adult can read the steps while a child finds the pieces. The counts are for this one model. For two models to stay built, add their parts lists together.
The canopy and display blocks are attached. There is no hinged hatch.
Gather pieces
Match the shapes and quantities. The pictures show our colours. Choose your own colours for the same parts; changing a part’s shape is a different substitution.
A wheeled base counts as one complete part, including its attached wheels.
1 × Base plate (4 × 8 studs)
Green
Part 4672a
1 × Long plate (2 × 8 studs)
Brown
Part 44524
2 × Square brick (2 × 2 studs)
Brown
Part 3437
1 × Square brick (2 × 2 studs)
Red
Part 3437
1 × Square brick (2 × 2 studs)
Yellow
Part 3437
2 × Square plate (4 × 4 studs)
White
Part 14721
2 × Tall roof slope (2 × 3 studs)
Red
Part 63871
2 × Tall roof slope (2 × 3 studs)
White
Part 63871
2 × Window / door frame (4 × 2 studs)
White
Part 61649
Shape-only checklist
- 1 × Base plate (4 × 8 studs)
- 1 × Long plate (2 × 8 studs)
- 4 × Square brick (2 × 2 studs)
- 2 × Square plate (4 × 4 studs)
- 4 × Tall roof slope (2 × 3 studs)
- 2 × Window / door frame (4 × 2 studs)
Total: 14 pieces
Build
STEP 1 OF 6
Turn the green base plate across the table to make an eight-stud-wide stall.
Add these pieces
- 1 × Base plate (4 × 8 studs) (Green)
Earlier pieces are lighter in the picture.
STEP 2 OF 6
Place two white window frames side by side along the back. Point their hinge details away from the counter.
Add these pieces
- 2 × Window / door frame (4 × 2 studs) (White)
Earlier pieces are lighter in the picture.
STEP 3 OF 6
Put a brown square at each front corner. Bridge them with the brown long plate to make an open counter.
Add these pieces
- 1 × Long plate (2 × 8 studs) (Brown)
- 2 × Square brick (2 × 2 studs) (Brown)
Earlier pieces are lighter in the picture.
STEP 4 OF 6
Place a red square and a yellow square in the middle of the counter as display blocks.
Add these pieces
- 1 × Square brick (2 × 2 studs) (Red)
- 1 × Square brick (2 × 2 studs) (Yellow)
Earlier pieces are lighter in the picture.
STEP 5 OF 6
Roof the stall with two white square plates above the frames. Their front halves overhang the counter.
Add these pieces
- 2 × Square plate (4 × 4 studs) (White)
Earlier pieces are lighter in the picture.
STEP 6 OF 6
Add four tall roof slopes across the canopy, alternating red and white. Leave the back row of roof studs showing and point all low ends toward the front.
Add these pieces
- 2 × Tall roof slope (2 × 3 studs) (Red)
- 2 × Tall roof slope (2 × 3 studs) (White)
Earlier pieces are lighter in the picture.
READY TO PLAY
Your little story
Choose what the display blocks represent.
Give the stall a name.
Take turns asking for an order and serving it.
Sources and credits
Original assembly. Part geometry adapted from the LDraw Parts Library; attribution and source notices retained. Colours are illustrative.
Revision: fac818b154e00f746c86713365d745cae67837aaccfb83236536ccdc22145238
Source notices and software licences · Model and inventory record · Render record