little buildclub✕ Exit instructions

LET’S BUILD TOGETHER

Pickup truck

12 pieces 6 steps · One little step at a time.

Print all steps ↗

A little before you begin

The tailgate is fixed. The brown parcel is attached to the studs in the loading bed.

Build away from the screen

Save or print the guide, including every step, the parts list and play ideas. For an offline copy, download the ZIP, extract it and open index.html. No bricks included.

Download PDFDownload offline ZIP
See all the pieces

A LITTLE PREPARATION

Gather your pieces

Match the shapes and quantities. The pictures show our colours. Colour names in the steps refer to the pictures; keep useful contrasts, such as a light belly against a dark body.

12pieces in total

See the original colours

Your checklist stays on this device when browser storage is available.

01

STEP 1 OF 6

Set the blue wheeled base on the table. Its four black wheels are already attached.

Set the blue wheeled base on the table. Its four black wheels are already attached. New additions are shown in their original colours; earlier pieces are lighter.
02

STEP 2 OF 6

Put the blue small plate on the chassis studs, then centre the blue base plate over it. The wide floor overhangs by two rows at both ends.

Put the blue small plate on the chassis studs, then centre the blue base plate over it. The wide floor overhangs by two rows at both ends. New additions are shown in their original colours; earlier pieces are lighter.
03

STEP 3 OF 6

Build the open loading bed at the rear. Add two blue wall bricks along each side, then turn one blue wall brick across the middle of the back edge for the tailgate.

Build the open loading bed at the rear. Add two blue wall bricks along each side, then turn one blue wall brick across the middle of the back edge for the tailgate. New additions are shown in their original colours; earlier pieces are lighter.
04

STEP 4 OF 6

Make the cab at the front with a white long brick across the floor, then a blue long brick directly above it for the windscreen.

Make the cab at the front with a white long brick across the floor, then a blue long brick directly above it for the windscreen. New additions are shown in their original colours; earlier pieces are lighter.
05

STEP 5 OF 6

Put the white square plate above the cab. Its front edge lines up with the front of the truck and its back half projects toward the loading bed.

Put the white square plate above the cab. Its front edge lines up with the front of the truck and its back half projects toward the loading bed. New additions are shown in their original colours; earlier pieces are lighter.
06

STEP 6 OF 6

Place the brown square in the open loading bed as a parcel. Put it just in front of the tailgate, centred between the side walls.

Place the brown square in the open loading bed as a parcel. Put it just in front of the tailgate, centred between the side walls. New additions are shown in their original colours; earlier pieces are lighter.

THE LAST STEP OF THE GUIDE

Room for a little more imagination.

Choose an address for the parcel. Draw a delivery route with two stops. Take turns being the driver and the person waiting.

Tell us how your build went

KEEP THE IMAGINATION GOING

Your next little idea.

All builds →
Back to the build

Part and software credits.